You will be surprised to see only the best way to spray car paint actually can not be difficult. That does not mean that you go at it and can just grab a tin of paint. There are some principles you have to know. Both in application and the preparation.
Prepare by assembling all your things that you are going to need. Make certain your surrounding area is protected against any possible over aerosol. Any parts that do not need to be sprayed and that can be removed then do so.
You’ll have to examine the car for any rough spots. This will smooth out the rough spots. Additionally, it lets the aerosol car paint to stick better. After you have finished sanding, make certain all the dust dirt and debris are removed from the vehicle. It is critical the automobile be totally clean.
This will make sure that you get an overall even coating of your coloured paint plus helps the paint to stick well. Be sure to apply light layers and allow for drying in between, when you spray the primer. How exactly to spray on auto paint requires a little getting used to.
Now you are pretty well to the point where you’re around ready to spray the shade. You may have decided to use the spray auto paint that comes in aerosol cans, or maybe you might have selected for the spray gun. Either way, make a few practice strokes on an item before you start with the car. Begin the passes with the paint without hesitation, after you’re ready. If you hold the spray can or gun in one spot, you’ll end up getting coverage that is uneven and possibly the paint will run. If this happens you have an important repair job on your had. You’ll most likely have directions regarding how to Alloy Wheel Refurb London spray auto paint using the spray or equipment cans.
You might want to study this option on the internet, or check with someone which is familiar with how to spray on car paint
Once you’re totally satisfied with the color, you’re down to the finishing touches. You may now want to apply several clear coats. This will give the finished and polish look to the car as well as protect the finish. It will be up to you although probably two coats will be sufficient. Make absolutely sure it’s dry in between coats.
Once again, you’ve got the choice of wet sanding if you favor. Again, it is suggested you request the guidance of people which can be familiar with how to paint a car. You need to wet sand with these grits in this sequence if you decide to follow this step then. Use 800, 1000, 1200, 1500 and the ultimately the 2000. This will remove spots that could be too heavy in the clear coat application.
Now you may need to using a rubbing compound to buff the surface in order to use a 2000 grit to remove any scratches.
You should now buff the surface. To do this just use a medium cut polish.
As a final touch, you might want to apply several layers of wax.